Features

• *0/**0/***0Base-T to ***0BASE-FX Converter
• Standard : IEEE **2.3 & **2.3,*0/**0/***0Base-TX,***0Base-FX
• Interface: 1 x RJ**5 connector, 1 x SFP Slot
• MDI/MDIX Auto-Crossover supported
• LED: Power , DUP,FP-LINK,RX,***0,TX
• Plug-and-Play installation
• Support Link Alarm
• Support Jumbo Frame (******6 Byte)
• Support Voltage Monitor

Features:

1. Web, SNMP, Console management
2. Hot-swappable module
3. Available with ST, SC, or WDM Simplex SC single-fiber connectors
4. Auto MDI/MDI-X on copper port
5. Auto-negotiation on copper port
6. LED status for Link/Activity, LFS, **0, Loopback, and Full Duplex/Collision
7. Link-Fault Signaling illuminates to indicate link failure
8. Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
9. Local and remote loopback

Features:

1. *-bit digital code and non-compression type video transmission
2. Support any high-resolution video signal
3. Support no-damage regenerative trunk of video
4. Auto-compatible PAL, NTSC and SECAM video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Constant optical power, and large dynamic range, and it is unnecessary to implement the adjustment of sport electrics or optics when using
7. Special ASIC design
8. Industry-grade of operation temperature from **0 to **5 degree Celsius, which is applied to the different working environment
9. Hot-swap function
10. Can be installed in *9 inches rack-mounted chassis (4U)